Where is dryer fuse located

Your dryer grew too hot in its operating temperature, and there was a reason for it. So just because you replaced a thermal fuse does not necessarily mean your repair is complete. You need to find out why your dryer overheated or you will find yourself replacing the thermal fuse near every time you run your dryer.

The first part you should investigate is the first part you removed from your dryer — the exhaust hose. If you are not diligent in cleaning your lint screen, that lint will travel to the exhaust hose and may eventually build up. If it becomes blocked partially or completely, your dryer can no longer vent the hot moist air that it needs to. This will cause it to overheat.

If the hose is empty, you may also want to consider that a blockage is deeper in the ventilation system built into your house.

While exhaust problems are the most common cause of overheating, a dryer that gets too hot can also be caused by malfunctions in the thermostat as well as the heating element. These issues should be checked as well if your thermal fuse keeps being tripped. You must be logged in to post a comment. May 22, Replacing a Thermal Fuse While the location of the thermal fuse may vary from model to model, in most cases it is located by the dryer exhaust hose.

What to Do Next? Leave a Reply Cancel Reply You must be logged in to post a comment. Text Schedule Service. Fuses often blow due to a clogged dryer vent. A bad fuse will have no continuity meaning the electrical path is broken.

A multimeter can be used to test it for continuity. Dryer heating element thermal cut-off thermal fuse degrees and high limit thermostat degrees, with wiring kit. If the dryer does not heat the thermal cut off may have blown and a new high limit thermostat is needed. Dryer high limit thermostat and thermal fuse kit. If the dryer does not heat the most common cause is a blown thermal fuse.

Both the thermostat and fuse can be tested to determine if either is defective. Heating element thermal cut-off thermal fuse degrees and high-limit thermostat degrees.

The thermal fuse is a safety device designed to protect the dryer from overheating. A multimeter can be used to test the fuse. Always check the dryer venting when replacing a blown thermal fuse. Dryer thermal fuse. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. Other components may be ready to fail as well so take the time to clean out your dryer and inspect the condition of everything inside.

While replacing a thermal fuse is pretty quick, always remember that it was tripped for a reason. You may want to contact a repair technician to quickly get down to the root cause of a blown thermal fuse in your dryer. You must be logged in to post a comment. June 13, Dryer Repair. Leave a Reply Cancel Reply You must be logged in to post a comment.

How to Fix It. Schedule Service. Track Your Technician. Check Your Job Status.